Badge Maker

Unofficial, community-made tool. Not endorsed by, sponsored by, or affiliated with The Church of Jesus Christ of Latter-day Saints, Intellectual Reserve, Inc., SkyWest, Inc., Republic Airways Inc., or PSA Airlines, Inc.

Loading the geometry engine…

Line 1 Line 2 (optional)

Text & logo

Font

Text height mm

Line 1 font

Line 1 height mm, 0 = same

Line 2 font

Line 2 height mm, 0 = same

Logo

Logo boldness mm

Logo size ×

Colors & finish

White layer

Text style

Black cap / relief mm

Fine top layers mm, 0 = off

Print orientation

Ironing

Filament 1 (body)

Filament 2 (text)

Back & attachment

Attachment

Pin slot depth mm

Magnet pocket ⌀ mm

Magnet pocket depth mm

Magnet spacing mm

Print inside-shirt backer

Size & printer

Width in

Height in

Corner radius mm

Min thickness mm

White layer thickness mm

Nozzle mm

Build plate mm

Download

File type

How to print & assemble

Load filament 1 = black and filament 2 = white (AMS / MMU / toolchanger). The 3MF files already assign the parts.
Bambu Studio / OrcaSlicer: ironing and 0.08 mm top layers are set on each badge object, without touching your profiles.
Magnets: four 10×2 mm N52 discs per badge. Glue two into the badge. Snap the loose two onto them, press the backer over them (pockets facing the badge), and glue — that guarantees every pair attracts. Wear the badge outside the shirt and the backer inside.
Pin slot: press a stick-on bar pin (1–1½ in) into the slot, clasp out; add a drop of glue.
Full white core: the whole face is white under a thin black cap, so you can also engrave or mill extra marks after printing.